RAPTOR SD FR691 KAWASAKI 54" CUT - OPEN DECK
Description:Hustler Raptor SD 54" Cut fitted with a Kawasaki FR691V, 23.0 hp Engine (Open Deck)
Editorial:The Raptor SD is a low profile, heavy-duty premium residential zero-turn with a
deep fabricated steel deck, toughest front end with large 13 x 6.50 front tires,
and exceptional control and handling. The Raptor SD also features an industry
leading Kawasaki engine that provides unmatched power versus the competition. Get
the job done faster with a 3 blade 54" deck.
Features:Kawasaki FR691V premium and commercial grade V- twin engine
Heavy duty fabricated steel deck: more durable
Fabricated heavy duty steel frame: best in category
SmoothTrak steering
Twin Hydro Gear ZT2800 hydro's: serviceable with spin-on filters
Patented automatic park brake system: built into levers
Heavy duty front caster forks with industrial steel ball bearings
20" drive tyres
13" front caster tyres
11.4 litres fuel capacity
12.1 kph
Engine guard
Warranty:Residential / Domestic Use Limited Warranty
Entire Product: 3 Years or 300 hours - whichever comes first - to the original
purchaser only.
Pumps & Motors only: 3 Years or 300 hours - whichever comes first - to the original
purchaser only.
Deck Spindles & Spindle Bearings: 3 Years or 300 hours - whichever comes first - to
the original purchaser only.
Engine Only: Kawasaki 3 years
Commercial Use Limited Warranty
Entire Product: 3 Years or 300 hours - whichever comes first - to the original
purchaser only.
Pumps & Motor only: 3 Years or 300 hours - whichever comes first - to the original
purchaser only.
Deck Spindles & Spindle Bearings: 3 Years or 300 hours - whichever comes first - to
the original purchaser only.
Engine Only: Kawasaki 3 years
Rental Application
To the original purchaser only
Entire Product: No Warranty
Pumps & Motor only: No Warranty
Deck Spindles & Bearings: No Warranty
Engine Only: Kawasaki 3 years
Please Note: For further details on our warranty terms and conditions including all
limitations and exclusions please refer to the warranty section on our web site or
contact our friendly sales team.
Engine:Kawasaki FR691V
HP:23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
Standards.)
Type:Air cooled, 90 degree V-twin, normally aspirated petrol engine.
Starter:12-volt
Ignition:Electronic
Charging System:12-volt (see engine manufacturers specifications)
Oil Filter:Spin-on engine oil filter / Total oil capacity 2.1 litre with filter
Fuel:Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers
specifications)
Fuel Capacity:11.4 L
Fuel Filter:Replaceable, automotive-type
Air Filter:Cartridge air filter
Cooling:Air cooled. Fly-wheel fan
Governor:Mechanical
Drive System:Dual hydrostatic. Twin Hydro Gear ZT2800 hydro's - serviceable with spin-on filters
.
Hydrostatic Drive:V-belt drive from engine crankshaft
Ground Speed - Forward:Infinitely variable 0-12.1 kph
Ground Speed - Reverse:0-6.4 kph
Steering:SmoothTrak twin-lever steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns are all controlled with hand-operated
controls.
Turning Radius:True zero turning radius. Turns within its own length. Counter-rotating,
independent drive wheels.
Brakes:In Service: Hydrostatic dynamic braking.
Parking: When steering levers are placed in neutral position, integral park brakes
are automatically engaged.
Caster Tyres:13 x 6.5 - 6, smooth tread
Tyres - Drive:20 x 12 - 10, turf tread
Weight:294 kg (650 lbs)
Seat:Moulded-vinyl seat. Fore and aft adjustment. Seat suspension springs and armrests
are standard.
Construction:Mainframe is 3.25" x 1.5" x .120" (8.3 cm x 3.8 cm x .34 cm) channel. Drive motors
mounted to .120" (.45 cm) welded steel. Front caster wheels mounted with commercial
duty greasable roller bearings on each wheel. Front caster forks are 3/8" (9.52 mm)
steel.
Hour Meter:Standard
ROPS:No
Seat Suspension:Seat suspension springs are standard.
Controls:Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
parking brakes
Cup Holder:Cup holder moulded into the left side fender. Accommodates nearly any cup size.
Height:42" (1066 mm)
Overall Length:73" (1850 mm)
Width:55" (1397 mm) w/discharge chute up.
Width (tyre-to-tyre):46" (1168 mm)
Deck System:Side-Discharge: 54" cut. (3) Blades , deck is suspended at two points at the rear
and one in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in
rolling and uneven terrain.
Cutting Widths:54" cut Side Discharge
Deck Lift:Foot-operated deck height adjustment.
Deck Construction:11 ga, .120" (3.0 mm) welded steel fabricated deck with 7 ga, .180" (4.6 mm)
reinforced spindle mount areas. Solid 3/8" x 1" (9.52 mm x 25.4 mm) steel bars
reinforce impact areas on trim edges. Steel deck housing is 4.5" (114.3 mm) deep to
provide room for high-capacity mowing.
Cutting Height(s):Foot-operated deck height adjustment.
Height adjustment in 1/4" increments from 1.5" to 4.5" (3.81 cm to 11.43 cm, .6 cm
increments)
Blade(s):(3) Heavy-duty blades. 18.50" x 2.50" x .20"
Blade Tip Speed:18,900 fpm
Blade Drive:V-belt drive to spindles with electric clutch. Spring tension idler pulleys for
extended belt life.
Spindles:Die cast aluminium housings with 1" (25.4 mm) steel shafts and double lip sealed
ball bearings.
Discharge Chute:High density, rubberised.
Optional Accessories:Optional accessories available for purchase separately include:
Mulch Kit: HA124455 - Blades included when purchasing this kit. Recycles clippings
under deck allowing clippings to be cut and recut, then discharged down into the
grass. Reduces handling of clippings, improves appearance, and recycles nutrients
back to the soil.
Grass Catcher: HA937458 - 2 bag catcher [non-powered]
Steering Lever Extension Kit: HA122760
Flex Forks Kit 54" / 60": HA605123
Light Kit: HA120608
Please Note:Specifications subject to change without notice.
Brand:Hustler
Product Line:ZTR